Includes: PicoScope Automotive Software Our Automotive Master Kit has been designed to give our customers a way of buying everything they could need in one hit. While there is always more you can buy to add to your toolbox, in this instance we’ve put together our most comprehensive kit to-date. Our Master Kit consists of an upgraded and extended Advanced Kit, in a new larger tougher carry case and our WPS500X Maxi Kit in a separate case. The kit includes PA210 Heavy Duty Case instead of Standard Case, and adds insulation piercing clips TA007, shrouded sprung hooks TA089/TA090, CAN Test Box TA069, PQ038 WPS500X Maxi Kit with adaptors & hoses, additional breakout leads (TA191, TA194, TA267), extra TA473 60A clamp, 2 additional TA499 x10 Scope probes and keyless entry lead TA330 to the accessories in our Advanced Kit. The combination of our kits and software make vehicle diagnostics intuitive and logical. Each kit comes with a variety of accessories to test a multitude of vehicle components, help and advice for these are available in our PicoScope 6 software. Our PicoScope Master Kit will allow you to undertake an endless list of diagnostic signals from your test vehicle. Which Diagnostics Kit is Right for Me?
Compare Kits
|
|
Carry Case: 4425A Master Kit WPS500X Maxi Kit (In Carry Case) PicoScope Automotive Oscilloscope - 4 Channels - For measuring currents between 10 mA and 60 A
- Display current waveforms for fuel injectors and fuel pumps.
- Improved performance and diagnostic accuracy
2x PicoBNC+ 60A AC/DC current clamp - Allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires
- No batteries required
- Ranging is carried out automatically with no user switching required
PicoBNC+ 2000 A AC/DC current clamp - Fully shielded for the complete length of the signal cable
- 3 m leads come with fixed 1.5 m ground extensions
- Shrouded/stacking banana plugs
4x PicoBNC+ Premium Test Lead to 4mm, 3m - View secondary ignition waveforms directly on-screen with an Automotive Oscilloscope
- Shielded 1.8m lead. Clips over plug lead or COP extension
- This lead is fitted with a PicoBNC+ interface
4x PicoBNC+ secondary ignition pickup - 11 sets of 6 different sized universal breakout leads
- And a set of 6 back pinning probes.
- Designed with the ability to clip together into a single block for ease of handling
Premium 6-way breakout lead set - Measures in the range -40° to 125°
- Enclosed in a 5mm stainless steel housing to provide contact and airflow measurement.
- Available only for PicoBNC+
PicoBNC+ Temperature probe (wide-range linear) - Enables voltage readings from numerous 2 pin sensors in the engine compartment
- Separate access to individual wires allows easy current measurement with clamps
- Simultaneously display both injector current and voltage on your PicoScope
TA012 Two Pin Break Out Lead - The breakout cable gives access to the individual wires to allow probing with current clamps.
2-pin ACS connector breakout lead - Designed with separate access to the individual wires to allow probing with current clamps.
2-pin Kostal connector breakout lead - Simply connect the breakout lead into the existing cable loom, and then take the output signal from the 4 mm banana plugs into the automotive oscilloscope
3-pin Kostal connector breakout lead - Gives access to the individual wires to allow probing with current clamps.
3-pin AMP superseal connector breakout lead - Mini ATC fuse extenders keep fuse in circuit while testing.
- Allows easy (clamp) current measurement.
- Simply move fuse to extension, plug extension in where fuse was and clamp to measure.
Fuse Extension Lead - Mini-ATC - ATC /ATO fuse extender keeps fuse in circuit while testing
- Allows easy current (clamp) measurement.
- Simply move fuse to extension, plug extension in where fuse was and clamp to measure
Fuse Extension Lead - Std ATC/ATO - JCase fuse extender keeps fuse in circuit while testing.
- Allows easy current (clamp) measurement.
- Simply move fuse to extension, plug in extension where fuse was & clamp to measure.
Fuse Extension Lead - JCASE - Maxi fuse extender keeps fuse in circuit while testing.
- Allows easy (clamp) current measurement.
- Simply move fuse to extension, plug in extension where fuse was & clamp to measure
Fuse Extension Lead - Maxi - These probes have a fixed x10 attenuation and are intended for high-speed signals
- Automatically recognised by PicoScope software when connected to the scope.
4x BNC+ 10:1 scope probe & adaptor - Provides the exact pressure needed to pierce the insulation of a wide range of wires
- Rotating banana jacks prevent test lead twisting
- Keeps the oscilloscope in-circuit while the wire is pierced
Red/Black Pair of Insulation Piercing Clips - Displays scope patterns of the secondary, faster than scoping the primary
- Flexible design allows for easier access to hard-to-reach components
- No batteries required
PicoBNC+ COP and signal probe - Brand-new lead and offers dynamic measurement of resistance
- Can be used to test diodes, in addition to resistance measurements.
- Has a total lead length of 2m in a Y configuration
BNC+ resistance test lead - Set of 4 extensions for cartridge coil packs
- Clip Pico secondary ignition lead over extension to see HT waveform
- Simply fit between coil pack & plugs
Coil-on-Plug Extension Leads - Set of 4 - Back pinning probe set
- Fit onto 4mm banana plugs, fine tips slide easily past connector seals
- 7 complete acupuncture probes, 3 probe sizes, replacement screws & needles
TA008 Acupuncture Back Pinning Probe Set - Designed for back-probing under the insulation
- Flexible mid-section improves access to difficult terminals
- Fits easily onto Pico Premium Test Leads
Flexible Back Pinning Probe (4x Red, 4x Black) - When a quick non-clip-on connection is required
- Pushes easily onto a Pico Premium Test Lead
- 4mm socket, length 115mm. Also available in black
Multimeter Probe (2x Red, 2x Black) - Adapts 4mm shrouded plug to unshrouded plug
- Allows test lead connection into any breakout box
- Quick push-on connection
4x Shrouded to Unshrouded Adaptor - Fully insulated with 4mm socket in the handle
- Toothed grip offers good contact on fine wire
- Easy connection to Pico Premium Test Leads
Small Crocodile / Gator Clip (2x Red, 2x Black) - Fully insulated with a 4 mm socket in the handle
- Easy connection to Pico Premium test lead
- Wide 30 mm opening jaw
Large Dolphin/Gator Clip (1x Red, 1x Black) - Fits all our BNC to 4 mm Pico Premium Test Leads
- Plier type clips designed to grab and hold the vehicle battery terminals
Battery Clip (2x Red, 2x Black) - Probe features a shrouded 4 mm socket.
- Allows you to hook your test lead onto small components.
- Can hold conductors up to 2 mm in diameter.
Shrouded Sprung Hook Probe (1x Red, 1x Black) - Makes it easy to keep test leads tidy in the engine bay
- Hang PicoScope up by its boot loop
- 100 mm long, plastic coated with rubber caps
- Detect the presence of the keyless entry carrier frequency
- In the range of 125-140 kHz
- 3m long lead
Keyless entry carrier signal detector - Prove the correct operation of each of the ultrasonic parking sensors
- Directly showing the strength of the signal from a given sensor
- 2m long lead
Ultrasonic parking sensor detector - Connect PicoScope to PC
- Scope power and high signal rating
- Compatible with USB2 PCs
USB Cable - Vsn 3.1 Gen 1, 1.8m - Ensure reliable signal and power connections between your PC and PicoScope.
- Longer lead provides more flexibility to your workstation.
USB Cable - Vsn 2.0, 4.5m
|
