NZ$59.00*
PE03 General Purpose pH Electrode
- Wide epoxy body for strength
- General lab use, economic electrode
- 12.3 x 160mm
NZ$67.00*
PE11 General Purpose pH Electrode
- Narrow epoxy body for smaller beakers
- Shorter to minimise tipping risk
- 10 x 128mm
NZ$103.00*
PE06HD Spear Tipped pH Electrode
- Spear tipped for penetration measurement in cheese, meats, soil
- Perfect (easy-clean) for sushi
- 12 x 160mm with fine spear-shaped tip
NZ$11.00*
Soft Padded Case for CA40
- Soft anti-scratch liner
- Internally padded. Velcro secured flap
- 240(L) x 90(W) x 34mm
NZ$59.00*
PE12 Electrode Head
- Replacement electrode & thermistor head for PH222 pH Meter
- Quick and easy swap-over
- Positive push-on, with screw-ring retainer
NZ$40.00*
- 10 x pH4 Buffer Capsules
- Easy pH meter calibration
- Simply mix into 100ml of distilled water
NZ$26.00*
Soft Clampmeter Carry Case
- Soft anti-scratch liner with internal pocket for test leads
- Secure zip fastener & external carry tab
- 330(L) x 140(W) x 50mm - For 2600 & 3600 series clamps
NZ$41.00*
Insulation Test Lead for 3604
- Insulation test probe for 3604
- In-probe button activates insulation test
- Use in conjunction with the red test lead and clip
NZ$48.00*
TP07 Temperature Probe for PH207
- Use with PH207 pH meter for automatic temperature compensation
- Also compatible with PH208, PH209YK, PH221 and WA2000 Series
- 110 x 4mm (+handle), 0~60°
NZ$43.00*
4213 Premium Test Lead Pair
- 4mm stackable plug with retracting shroud, 2mm probe tip
- 1.5m x 1.5mm silicon insulated cable
- 25 Amp, 600V CAT III rating
NZ$35.00*
2353 100 Red/Black Patchcord Pair
- 4mm shrouded plugs
- Right angled to straight
- 1m x 1.5mm silicon insulated, 25 Amp, 1000V CAT III rating
NZ$16.00*
3034 Spade Adaptor Pair
- Better than crushing your test leads
- Easy-positive connection,Grooved for 4.3 & 6.3 mm bolts
- 36 Amp, 33VAC, 70VDC rating
NZ$28.00*
- Holds well - even on very small pins
- Rotatable pincers minimise test lead pull
- Tested to 8000V! 6 Amp, 1000V CAT III rating
NZ$32.00*
- Wide opening jaws & very positive grab
- Insulated jaw backs prevent accidental shorts
- Tested to 8000V! 6 Amp, 1000V CAT III rating
NZ$31.00*
5004 Large Crocodile Clip Pair
- Large 20mm bite & good strong grip
- 3 nose teeth hold small conductors too
- 20 Amp, 1000V CAT III rating
NZ$43.00*
4413 Red/Black Test Lead Pair
- 4mm right angled shrouded plug, 2mm probe tip
- 1.5m x 1.5mm silicon insulated cable
- 25 Amp, 1000V CAT III, 600V CAT III rating
NZ$127.00*
S1021 Oscilloscope Probe
- A good quality general purpose oscilloscope probe
- 1:1/10:1 Switchable, 20/150MHz Bandwidth
- 400/600Vpk. 1.8/2.3ns Rise Time
NZ$93.00*
TA536 Passive Oscilloscope Probe
- 350 MHz bandwidth
- 1:1/10:1 switchable
- Upgraded high durability probe cable
NZ$208.00*
TA561 Passive Oscilloscope Probe
- 500 MHz bandwidth
- 10:1 attenuation ratio
- High voltage rating 300 V CAT II for safe operation in various environments.
NZ$266.00*
V6021 Oscilloscope Probe
- Attenuation = 1:100, Bandwidth = 300MHz
- Maximum Voltage = 1500Vp, Rise Time = 1.2ns
- One of two high voltage probes in the range. Both have enhanced BNC insulation.
NZ$314.00*
V6041 Oscilloscope Probe
- Attenuation = 1:100, Bandwidth = 300MHz
- Maximum Voltage = 2500Vp, Rise Time = 1.2ns
- The second of two high voltage probes in the range. Both have enhanced BNC insulation
NZ$367.00*
H4011 Oscilloscope Probe
- Attenuation = 1:10, Bandwidth = 350 MHz
- Maximum Voltage = 600V, Rise Time = 1ns
- With a 350MHz bandwidth, the 4011 is suitable for all but the very fastest Pico oscilloscope range
NZ$856.00*
M5001 Oscilloscope Probe
- Attenuation = 1:10, Bandwidth = 500 MHz
- Maximum Voltage = 200V, Rise Time = 0.7ns
- This high stability 500MHz probe has a smaller probe and is much easier to use on high density PCBs.
NZ$264.00*
DR7012 Oscilloscope Probe
- Attenuation = 1:1, Bandwidth = 950 MHz
- Maximum Voltage = 50V AC; 200V DC
- A demodulating probe, the 7012 output is a DC voltage equal to the peak to peak value of the measured waveform
NZ$118.00*
HHK160 Penetration Probe
- Sharp point allows easy penetration for taking internal temperatures
- Response time < 3 seconds
- K-Type thermocouple - Max temperature 250°C, 3.3 x 130mm
NZ$131.00*
HHK000 Surface Probe
- Spring-loaded sensing tip provides positive surface pressure
- Response time < 2 seconds
- K-Type thermocouple - Max temperature 250°C, 6 x 130mm
NZ$141.00*
HHK020 Heavy Duty Surface Probe
- High temperature probe - Ideal for weld temperatures
- Response time < 1 second
- K-Type thermocouple - Max 1000°C, 12 x 130mm
NZ$187.00*
HHK028 Right Angled Surface Probe
- High temperature weld temperatures
- Response time < 1 second
- K-Type thermocouple - Max 1000°C, 12 x 130mm
NZ$73.00*
HHK040 Pipe Clamp Probe
- Ideal for HVACR pipe work
- Response time < 2 seconds
- K-Type thermocouple - Maximum probe temperature 100°C. For pipe diameters from 6 to 30mm.
NZ$122.00*
HHK044 Ribbon Surface Probe
- Ideal for stationary, hard or metallic surfaces, as small as 8mm
- Response time < 0.5 seconds
- K-Type thermocouple - Max 250°C, 8 x 130mm
NZ$136.00*
HHK060 Rigid Between Pack Probe
- Designed specifically to slide easily between packets or boxes of produce
- Response time < 3 seconds
- K-Type thermocouple - Max 250°C, 4.5 x 130mm
NZ$104.00*
HHK080 Velcro Pipe Probe
- Wrap-around probe suitable for the temperature measurement of medium and large pipes in the HVACR & process industries
- Pipes up to 150mm diameter
- K-Type thermocouple - Max 100°C, 20 x 500mm
NZ$138.00*
- Suitable for liquids and soft or semi-solid food, soft rubber & plastic
- Response time < 2 seconds
- K-Type thermocouple - Max 250°C, 1.8 x 130mm
NZ$171.00*
HHK116 Heavy Duty Chisel Point Probe
- Heavy Duty probe with T-Bar handle
- Response time < 10 seconds
- K-Type thermocouple - Max 250°C, 4.5 x 130mm
NZ$128.00*
HHK117 Heavy Duty Penetration Probe
- For denser materials, raw food products and harder rubber
- Response time < 4 seconds
- K-Type thermocouple - Max 250°C, 4 x 130mm
NZ$149.00*
HHK120 Asphalt Probe
- Long heavy duty penetration probe with T-Bar handle
- Reduced sensing tip diameter for response time < 10 seconds
- K-Type thermocouple - Max 250°C, 6.35 x 300mm
NZ$139.00*
- Mineral insulation affords probe flexibility & high temperature range
- Response time < 2 seconds
- K-Type thermocouple - 1.5 x 130mm
NZ$128.00*
HHK240 Binder Probe
- Rounded tip allows insertion through self-sealing binder glands in fluid filled pipes, vessels and radiators
- Response time < 3 seconds
- K-Type thermocouple, -75 ~ 250°C, 3.0 x 130mm
NZ$113.00*
HHK300 Air/Gas/Hot Water Probe
- For HVACR, Viticulture air and Aged/Infant care hot water measurements
- Fast respose time < 0.5 seconds
- K-Type thermocouple, -75 ~ 250°C, 4.5 x 130mm
NZ$155.00*
HHK745 Burger Probe
- Designed for use in busy fast food kitchens
- Stainless steel foot ensures consistently correct 6mm insertion depth
- K-Type thermocouple, -75 ~ 250°C, 4.5 x 130mm with 1.0 x 6.0mm tip
NZ$84.00*
HHK016 Magnetic Probe
- Measure & monitor ferrous metal surface temperatures e.g. heat exchangers and radiators
- Response time < 20 seconds
- K-Type thermocouple, -20 ~ 150°C, 1m cable, 20mm diameter magnet
NZ$19.00*
HHK362 Exposed Junction Bead Probe
- Measure or monitor fridges, freezers, ovens, water, air & curing concrete
- Response time < 0.5 seconds
- K-Type thermocouple, -60 ~ 250°C, 1m or custom lengths
- 1.5mm x 1000mm or talk to us about custom lengths
NZ$24.00*
TPK01 Bead Probe
- Fast bead probe with easy-grip cable tidy handle
- Use with full length, or as wrapped stub air probe
- K-Type thermocouple, -60 ~ 250°, 1m