RayTemp 38 Professional Infrared Gun

Temperature Range -60 to +1000°C
50:1 optics ratio
Sample rate less than 1 second
Automatic shut off after approximately 7 seconds
Emissivity adjustable from 0.1 to 1.0 in 0.01 increments
°C/°F & max/min/average/differential display

The professional RayTemp38 pistol-grip, heavy duty, infrared thermometer has some distinguishing features that make it the perfect choice in many difficult measurement situations.

Where target height or access is a problem, or dangerous machinery or voltages are nearby, the Raytemp 38 really proves its value. The 50:1 Distance to Spot ratio allows measurement of much smaller targets at greater distances or safer and more accessible positions.

Measuring high temperatures or non-organic surfaces? No problem, the Raytemp38 IR range is -60 to 1000°C and emissivity is adjustable from 0.10 to 1*.

If the emissivity of your target's unknown, simply use a surface probe plugged into the Raytemp38, compare the probe and IR readings (they're displayed simultaneously on the Raytemp38's large LCD) and adjust the emissivity until they're the same. Remove the surface probe and continue with IR measurements. (The reference surface can be a sample of the target material and doesn't have to be at the target temperature.)

Minimum, maximum, average and differential measurements are recorded each time the trigger is pulled, so can be reviewed after each measurement - a great feature when scanning large areas.

Checking distribution boards for hot spots? High and Low Alarms can be set so that the Raytemp38 beeps when either is breached. Set it just above ambient and you'll be quickly alerted to any scanned board component running hot.

$581.00*

Order

Specifications
Optional temperature probes

Measurement Range:	IR -60 to 1000°C Probe -64 to 1400°C (K-type; probe not included)
Operating Range:	0 to 50°
Resolution:	0.1° (-83.2 to 999.9°) otherwise 1°
Accuracy:	IR ±2% of reading or 2° (whichever is greater) Probe ±1% of reading or 1° (whichever is greater)
Optics Ratio:	50:1
Emissivity:	0.95 default - adjustab 0.10 to 1.00
Response Time (90%):	<1 sec
Other Functions:	Display Hold and Auto Power-off, Lock (on) mode, Display Backlight, Laser Pointer, Min/Max/Average & Differential Recording, Low and High Alarms, Emissivity Adjustment
Dimensions:	203.3mm(L) x 47(W) x 197 386.1g
Battery:	2 x AAA provides 140Hrs of operation (Alkaline, without laser and back light)

NZ$118.00*

Qty:

Order

Sharp point allows easy penetration for taking internal temperatures
Response time < 3 seconds
K-Type thermocouple - Max temperature 250°C, 3.3 x 130mm

HHK160 Penetration Probe

NZ$131.00*

Qty:

Order

Spring-loaded sensing tip provides positive surface pressure
Response time < 2 seconds
K-Type thermocouple - Max temperature 250°C, 6 x 130mm

HHK000 Surface Probe

NZ$141.00*

Qty:

Order

High temperature probe - Ideal for weld temperatures
Response time < 1 second
K-Type thermocouple - Max 1000°C, 12 x 130mm

HHK020 Heavy Duty Surface Probe

NZ$187.00*

Qty:

Order

High temperature weld temperatures
Response time < 1 second
K-Type thermocouple - Max 1000°C, 12 x 130mm

HHK028 Right Angled Surface Probe

NZ$73.00*

Qty:

Order

Ideal for HVACR pipe work
Response time < 2 seconds
K-Type thermocouple - Maximum probe temperature 100°C. For pipe diameters from 6 to 30mm.

HHK040 Pipe Clamp Probe

NZ$122.00*

Qty:

Order

Ideal for stationary, hard or metallic surfaces, as small as 8mm
Response time < 0.5 seconds
K-Type thermocouple - Max 250°C, 8 x 130mm

HHK044 Ribbon Surface Probe

NZ$136.00*

Qty:

Order

Designed specifically to slide easily between packets or boxes of produce
Response time < 3 seconds
K-Type thermocouple - Max 250°C, 4.5 x 130mm

HHK060 Rigid Between Pack Probe

NZ$104.00*

Qty:

Order

Wrap-around probe suitable for the temperature measurement of medium and large pipes in the HVACR & process industries
Pipes up to 150mm diameter
K-Type thermocouple - Max 100°C, 20 x 500mm

HHK080 Velcro Pipe Probe

NZ$138.00*

Qty:

Order